Every Queensland home must have working photoelectric smoke alarms that comply with Australian Standard AS 3786:2014, and the requirements apply to owner-occupied houses, rental properties and units alike. From 1 January 2027, all Queensland homes must meet the full interconnected, photoelectric standard, so Brisbane owners and landlords should confirm their compliance now.
What Queensland Law Requires
Queensland’s smoke alarm rules sit in the Fire Services Act 1990 and are administered by the Queensland Fire Department (formerly Queensland Fire and Emergency Services). The requirements differ slightly depending on when a dwelling was built or last renovated, but the standard for all homes by 1 January 2027 is the same.
- Alarms must be photoelectric and comply with AS 3786:2014. Ionisation-only alarms no longer meet the standard.
- Alarms must be interconnected, so that when one sounds, all alarms in the dwelling sound.
- Alarms must be hardwired to the mains power or powered by a non-removable 10-year battery.
- Alarms must be located in every bedroom, in hallways connecting bedrooms to the rest of the home, and on every level (including levels with no bedrooms).
- If there are no hallways, an alarm must be placed between the bedrooms and the rest of the dwelling.
Rental Properties: Who Is Responsible
Lessors (landlords) and their agents must ensure each rental property complies before a new tenancy begins and at every lease renewal. Tenants have their own duties under the Residential Tenancies and Rooming Accommodation Act 2008.
- Lessor: install compliant alarms, test and clean them within 30 days before the start of a tenancy, and replace any alarm that fails or reaches the end of its service life (typically 10 years).
- Tenant: test and clean alarms at least once every 12 months, replace removable batteries as needed, and tell the lessor promptly if an alarm is not working.
- Tenants must not remove or disable an alarm. Doing so can breach the tenancy agreement and the Fire Services Act.
Landlords who fail to comply risk fines. Penalty amounts are set by the Queensland Government and change with penalty unit values, so confirm current figures with the Queensland Fire Department rather than relying on a published number.
Selling or Renovating a Brisbane Home
Sellers must give buyers a Form 1 or related disclosure, and smoke alarm compliance should be sorted before a sale or major renovation. Building work that needs approval, such as a new bedroom or extension, triggers the requirement to install compliant alarms across the dwelling. Many Brisbane homes built before 2017 still have ionisation or battery-only units that need replacing.
Always use a licensed electrician to install hardwired alarms. Battery-powered 10-year units can be fitted by the owner, but must be interconnected wirelessly if there is more than one.
Official Sources
Check these sites for the latest compliance dates, penalty amounts and approved alarm models before you buy or install.
Rules checked November 2026.

Frequently Asked Questions
How often should I test my smoke alarms?
Test them monthly by pressing the test button, and clean them at least once a year with a vacuum or soft brush. Tenants must test and clean alarms at least every 12 months. Replace any alarm that is 10 years old or older, even if it still sounds.
Can I use battery-only smoke alarms in Queensland?
Only if the battery is a sealed, non-removable 10-year lithium cell and the alarm meets AS 3786:2014. Alarms with replaceable 9-volt batteries do not meet the 2027 standard, unless they are hardwired with a battery backup.
Does the law apply to owner-occupied homes?
Yes. The photoelectric and interconnection requirements apply to all Queensland dwellings, including owner-occupied houses, townhouses and units, not only rentals.
